Is Burning Wood Bad for the Environment?

It’s a question I get asked a lot. Most of the information you read online is contradictory and confusing – one source will tell you that biomass energy is saving the world and another will say that wood burners are polluting our cities and causing all the world's health problems.

Like most questions about the environment, there’s not a straightforward answer as to what’s ‘good’ or ‘bad’, but it’s easier to understand when you break it down.

I’m going to talk about three elements – renewability, carbon footprint and local pollutants

 

Renewability

Wood is a renewable fuel source, especially when cut from sustainable forests. We’ve written about sustainably forestry before but it means that when trees are felled they’re replaced, or that the tree is cut down to ground level so it re-grows.

According to Forestry England, woodland cover has doubled in England over the last 100 years, so it’s clear that our sustainably forestry efforts are working!

The same can't be said for anything involving fossil fuels like coal or gas, which is why countries all over the world are trying to remove their dependency on these and focus on biomass fuels instead

FYI - biomass is a collective term which means organic matter – anything produced by plants or animals. Biomass energy normally means burning wood, but can also include things like straw, grass and even animal dung!

So is it bad?

No, it's a fully renewable energy source when forests are managed properly

 

Carbon Footprint

In case you’ve been living under a rock for the past 10 years, the carbon footprint of an activity or organization is the amount of C02 it releases into the atmosphere, compared to the C02 it removes.

Wood burning as a practice is carbon neutral. Trees absorb carbon dioxide throughout their lifetime and remove it from the atmosphere (which is why tree-planting is so important!) then release that carbon back into the atmosphere when they die. Burning wood does the same thing -  we only release the carbon that has been stored in the wood back into the atmosphere.

This doesn’t take into account transporting the wood from the forest to your stove. It’s pretty obvious but the further the wood has to travel, the higher the carbon footprint.

When you compare wood burning to fossil fuels like coal, their carbon is built up over millions of years, and would remain safely ‘locked up’ in the ground if they weren’t burned, it would never be naturally released. By burning them, we're releasing carbon into the atmosphere that shouldn't be there, creating a massive carbon footprint.

So is it bad?

Burning wood may not be quite as environmentally friendly as heating with renewable electricity, but it’s safe to say it's better than burning coal or gas! Just make sure you keep the road miles down and don't buy imported wood!

 

Local pollutants

This is where wood burning gets its bad reputation, and what it’s DEFRA are trying to improve with their Clean Air Strategy

When wood is burned it emits particulate matter (PM), which are tiny particles of solids or liquids in the air. Some we can see, like smoke and soot, and others are microscopic, but they're all small enough that we breathe them in. This can cause health problems if inhaled in large amounts, so it’s important that we reduce them as much as possible.

How much PM is emitted depends on two things – the wood you burn and the efficiency of your stove

A properly fitted Ecodesign Ready stove can halve the PM emissions compared to an inefficient, older stove. In some Smoke Control areas, burning wood has already been banned in anything other than DEFRA approved stoves, and from January 2022 all new stove installations will have to be Ecodesign Ready.

Likewise, the wood you burn is really important. It goes without saying, but burning anything that has been treated (like old furniture or fence panels) is a massive no-no. Not only do they burn badly, but they can emit toxic pollutants into your home and the environment. Just don’t do it.

At Love Logs, we talk about moisture content a lot. Low moisture content means your logs burn longer and hotter and emit less smoke, so they give you a better experience as a customer. However, they’re also much better when it comes to air quality.

Kiln-dried wood typically emits around half of the PM when compared to wet wood, which is why it’s so important to make sure you only burn wood with a moisture content below 20%.

If you don’t have a moisture tester, you can instantly see when you light your fire how much smoke it’s giving off. In general, the less smoke you can see, the less PM it’s emitting and as a bonus, the cleaner your appliance will be at the end of it!

So is it bad?

Taking all of this into consideration, burning wood isn’t ‘bad’ for the environment - it’s a renewable energy source with a low carbon footprint. We just need to make sure we do it properly.

  • Only buy British wood from sustainable forests (did you know that a lot of what is sold in the UK is actually imported from Eastern Europe!)
  • Only burn properly dry (less than 20% moisture content) wood in a proper appliance
  • Don’t buy wood wrapped in plastic. Obviously.

Shop our kiln-dried, plastic-free logs here